A line of amplifiers that defines high impact. Up to 3,400 watts in a 2 rack-unit chassis that's only 13" deep and 21 lbs. We included our exclusive PowerLight® Technology used in our award-winning PowerLight Series for chest-pounding bass and crystal-clear highs. It also features hum-free noise floor and ultra-low distortion of 0.03% THD. To keep PLX running under the most demanding conditions, we've even added our Advanced Thermal Management System. PLXs offer the reliability of a company that's been building professional amplifiers for over 30 years.
FEATURES
·Exclusive PowerLight power supply for superior bass and lighter weight
·Ultra-low distortion (0.03% THD at 8 ohms) & studio-quality noise floor (-107 dB)
·LED indicators include bridge mono and parallel input modes
·Compact 2 RU, 21 lbs. and 13" deep chassis fits into any rack
·Class H output reduces AC power draw and heat by 40% (2402, 3002, & 3402)
·Selectable clip limiters and subsonic filters reduce distortion and protect speakers
·Variable-speed fan for low noise and solid 2 ohm performance
·Both 1/4" TRS & XLR inputs, Speakon® and shock-proof binding post outputs
·3-year warranty plus optional 3-year extension available
|
SPECIFICATIONS |
PLX1202 |
PLX1602 |
PLX2402 |
PLX3002 |
PLX3402 |
|
|
STEREO MODE, Both Channels Driven |
|
8 ohms (20 Hz-20 kHz 0.03% THD) |
200 W |
300 W |
425 W |
550 W |
700 W |
|
4 ohms (20 Hz-20 kHz 0.05% THD) |
325 W |
500 W |
700 W |
900 W |
1100 W |
|
2 ohms (1 kHz 1% THD) |
600 W |
800 W |
1200 W |
1500 W |
1700 W |
|
|
BRIDGE MONO MODE |
|
16 ohms (20 Hz-20 kHz 0.1% THD) |
400 W |
600 W |
850 W |
1100 W |
1400 W |
|
8 ohms (20 Hz-20 kHz 0.1% THD) |
700 W |
1100 W |
1500 W |
2000 W |
2200 W |
|
4 ohms (1 kHz 1% THD) |
1200 W |
1600 W |
2400 W |
3000 W |
3400 W |
|
Signal to Noise (20 Hz-20 kHz) |
< -106 dB |
< -107 dB |
< -108 dB |
< -107 dB |
< -107 dB |
|
Input Sensitivity @ 8 ohms |
1.0 Vrms |
1.2 Vrms |
1.5 Vrms |
1.7 Vrms |
1.9 Vrms |
|
Input Sensitivity @ 4 ohms |
0.9 Vrms |
1.1 Vrms |
1.3 Vrms |
1.5 Vrms |
1.7 Vrms |
|
Voltage Gain |
40x (32 dB) |
40x (32 dB) |
40x (32 dB) |
40x (32 dB) |
40x (32 dB) |
|
Output Circuitry |
AB |
AB |
2-Step Class H |
2-Step Class H |
2-Step Class H |
|
Power Requirements
(1/8 Power Pink Noise @ 4 Ohm) |
6A |
10A |
8A |
10A |
12A |
|
|
ALL MODELS |
|
Distortion (SMPTE-IM) |
Less than 0.01% |
|
Distortion (Typical)
20 Hz-20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power |
Less than 0.01% THD
Less than 0.01% THD
|
|
Frequency Response |
20 Hz-20 kHz, +/- 0.2 dB / 8 Hz-50 kHz, +0, -3 dB |
|
Damping Factor |
Greater than 500 |
|
Input Impedance |
6k ohms unbalanced, 12 k ohms balanced |
|
Input Clipping |
10 Vrms (+22 dB) |
|
Cooling |
Variable-speed fan, rear-to-front air flow |
|
Connectors, each channel |
Input: 3-pin XLR & 1/4" TRS balanced
Output: Neutrik® Speakon® and touch-proof binding posts |
|
Amplifier Protection |
Full short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into reactive or mismatched loads |
|
Load Protection |
On/off muting, DC-fault power supply shutdown |
|
Dimensions |
19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces)
13.25" (33.7 cm) deep (from front mounting rails) |
|
Gain |
40x (32 dB) |
|
Weight |
21 lbs (9.5 kg) net, 27 lbs (12.3 kg) shipping |
|
